How should you go about repairing your own garage door if you are doing it for the very first time? Do you have any practical knowledge except for the few DIY tutorials that you’ve seen on YouTube? I guess not! This is going to be a real disaster and even you can feel it. Before you take another step in this direction, let’s wait up for a second and reflect upon it. Your Garage Door Repair North Hollywood experts would advise you to start by doing the following if you don’t want to fail at it. Remember, you are not a professional and are still in the learning phase, so you need to be extra careful with handling the tools and equipment and the garage door itself as well.
Table of Contents
Examination Of Metal Parts
The very first check that any reputed Garage Door Service North Hollywood CA provider would recommend you to perform is that of the metal tracks inside the garage. You need to make sure that the area is properly lit up so that you can look closely at the mounting brackets holding the tracks to the walls. Tighten the bolts or screws if they’re loose at the brackets. Also when you are working inside the garage, don’t forget to examine the tracks for any dents, depressions and crimps, or flat spots. You can use a rubber mallet to pound out any and all damaged spots. You can also use a hammer or a block of wood for the purpose and if the tracks are damaged beyond repair, they should be replaced.
Alignment Of Tracks
The next step is to check if the tracks are properly aligned. Make use of a level for horizontal tracks. You should see that they slant slightly down and mainly towards the back of the garage. When dealing with roll-up doors, make sure that the vertical sections of the track are plumb exactly. Check if both the tracks are at the same height on the garage walls. You can loosen the screws or bolts holding the mounting brackets if the tracks are not properly aligned. You can then tap the tracks carefully back into position. Then do remember to recheck them with the level to ensure they’re in the right position. Tighten the screws or bolts to secure them.
Carrying On Some Typical Garage Door Repairs
According to the leading Garage Door Repair North Hollywood experts, following are some of the most common garage door problems and their instant solutions:
Noisy Garage Door
Noisy garage doors can cause anyone to wake up from their sleep especially if they live above or next to the garage. You will be able to fix most noisy garage door problems with a routine maintenance oiling and cleaning of parts and replacement of a few parts if the need arises.
Fixing Frozen Garage Door
You are not able to open and close your garage doors during the winter when cold and moisture is at their peak. They combine to freeze your garage door and it gets stuck to the garage floor. You can use a heat gun or your strongest hair dryer of the lot to melt the ice. Also, shop for standard de-icing products while you are the store and be careful not to damage the door while using them.
How To Replace A Broken Glass
A broken glass in your garage looks really bad and the leading Garage Door Service North Hollywood CA providers suggest you do something about it really quick as it can become a safety issue. All you need to do is get the required piece of the glass from a hardware store. Just give them the measurement and they will provide you with one. Unscrew the panel of the frame that held the glass in place and remove the remaining broken pieces. Apply super glue to the glass edges that are going to come in contact with the crevice of the frame. Place the glass carefully and seal it with a strong putty of your choice or the one recommended by the manufacturer. Now let it set as it says on the pack and then cover the panel back.